Steps
1. Align and place the power button, along with its cable, into the slot on the palm-rest and keyboard assembly.
2. Align the screw holes on the power-button bracket to the screw holes on the palm-rest and keyboard assembly.
3. Replace the three screws (M2x2) that secure the power-button bracket to the palm-rest and keyboard assembly.
Next steps
1. Follow the procedure from step 6 to step 25 in installing the
board (NVIDIA GeForce 3050
2. Install the battery.
3. Install the
rear-I/O
cover.
4. Install the
wireless
card.
5. Install the
2230 solid-state drive
6. Install the
2230 solid-state drive
7. Install the
base
cover.
8. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
2230 solid-state drive
4. Remove the
2230 solid state drive
5. Remove the
wireless
card.
6. Remove the
rear-I/O
7. Remove the battery.
8. Remove the speakers.
9. Remove the
power-adapter
10. Remove the touchpad.
Ti), whichever applicable.
or
2280 solid-state drive
or
2280 solid-state drive
After working inside your
Before working inside your
or
2280 solid-state drive
or
2280 solid-state drive
cover.
port.
system board (NVIDIA GeForce 3060/3070 Ti/3080 Ti)
in slot one, whichever applicable.
in slot two, whichever applicable.
computer.
computer.
in slot one, whichever applicable.
in slot two, whichever applicable.
or
system
67