Step 2 - Confirm Dhcp Ip Address Received - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Step 2 – Confirm DHCP IP Address received
Using the Windows Command Prompt or equivalent in the chosen operating system, confirm
that a valid IP Address has been received from the DHCP server defined on the Xirrus Array.
Issue the ipconfig command from the Windows Command Prompt to display the IP information
received from the DHCP process. As illustrated below on the Wireless adapter an IP Address of
192.168.1.101 has been received.
Note: On Mac OS X and Linux operating system variants, use a Terminal window and enter the
ifconfig command to display the same information.
18
CONFIDENTIAL