Step 2 – Confirm Dhcp Ip Address Received - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Step 2 – Confirm DHCP IP Address received
Assuming our test laptop is connected to the LAN1 port on the back of the DSA-3600 we should
successfully receive an IP address via DHCP.
Using the Windows Command Prompt or equivalent in the chosen operating system, confirm
that a valid IP Address has been received from the DHCP server configured on the DSA-3600
Gateway
Issue the ipconfig command from the Windows Command Prompt to display the IP information
received from the DHCP process. By checking on the Wireless adaptor you should be able to
confirm an IP Address in the range of 192.168.1.x has been received.
Note: On Mac OS X and Linux operating system variants use a Terminal window and enter the
ifconfig command to display the same information.
26
CONFIDENTIAL