Step 3 - Launch Web Browser And Login - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Step 3 – Launch Web Browser and login
When the web browser on the test laptop is launched the Xirrus Array will automatically capture
the session and redirect the user to the amigopod hosted login page as shown below:
Enter the test user details created in Step 3 of the amigopod configuration procedure and click
the Login button.
At this point the test user should be successfully authenticated and allowed to transit through
the Array and onto the Internet or Corporate network.
Note: If the web browser fails to redirect check that the DNS server configured in the DHCP
Server is available and successfully resolving domain names. Without name resolution working
the web browser will never attempt to connect to the website defined in web browser home
page and therefore redirection will be unsuccessful. Other situations that can cause issues with
the captive portal include but are not limited to:
Web browser home page set to intranet site not available in current DNS
•
Proxy Server configuration in browser using non standard HTTP ports
•
CONFIDENTIAL
19