Step 3 - Radius Configuration - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Xirrus array integration guide

Hide thumbs Also See for PowerConnect W Clearpass 100 Software:

Table of Contents

Click on the 'Save' button (bottom right).

Step 3 – RADIUS Configuration

To configure the RADUIS Server, uncheck the 'Global' box; the SSID Amigopod RADIUS

Configuration section should appear. Click the 'External' circle and click the 'Accounting' box.

Enter the IP Address of your Amigopod appliance and the Port Numbers (note, the same IP

Address can be used for both the RADIUS and Accounting Servers). Next, enter the 'Shared

Secret', and verify by typing it a second time in the 'Verify Secret' field (do this for both the

RADUS and Accounting Servers). Finally, enable the SSID by clicking on the 'Enable' box next

to the SSID name.

Apply and Save your configuration by clicking on the 'Apply' and 'Save' button.

CONFIDENTIAL

Table of Contents

Need help?

Do you have a question about the PowerConnect W Clearpass 100 Software and is the answer not in the manual?

Amigopod