AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual page 4

The following table shows the software versions used during the integration testing. This
document will be updated in the future if changes in either amigopod or Cisco subsequent
releases affect the stability of this integration. It is advised that the customer always check for
the latest integration guide available from either amigopod or Cisco.
Dated Tested:
AmigoPod Version:
Plugins Required:
Xirrus Array:
Integration:
Amigopod was deployed locally on the LAN interface of the Xirrus Array as a dedicated
appliance. Amigopod VMWare image, or virtual appliance solution, can also be used
successfully.
Xirrus Array IP Address
Internet Gateway Address
amigopod IP Address
amigopod RADIUS port
The following diagram provides a high level overview of the test topology:
CONFIDENTIAL
April 2010
Kernel2.1, Radius Services 2.1
Standard build only
System Software - 4.0.6 Build 1169
SCD Firmware - 2.21 Build 3157
Boot Loader - 1.0.0 Build 3090
IAP Driver - 1.5.0 Build 2036
HTTP Captive Portal
192.168.1.104
192.168.1.1
192.168.1.103
Auth 1812 Acc 1813 (default settings)
4