Inbound Filter - D-Link DWR-512 User Manual

Section 3 - Configuration
Inbound Filter enables you to control what packets are allowed to come in to your network from the Internet. The inbound filter only applies
to packets that are destined for Virtual Servers or DMZ hosts. After modifying any settings, click Save Settings to save your changes.

Inbound Filter:

Use Schedule Rule:
ID:
Source IP : Ports:
Destination IP : Ports:
Enable:
Schedule Rule #:
Previous Page:
Next Page:
D-Link DWR-512 User Manual
Inbound Filter
INBOUND FILTER SETTING
Select this box to Enable the filter.
Select a schedule to use and copy to the specified
rule ID when you click the Copy to button. You may
select Always On or use a specific schedule that
you have defined. To create and edit schedules,
please refer to "Schedules" on page 54.
INBOUND FILTER RULES LIST
This identifies the rule.
Specify the local IP address and then
specify the port after the colon.
Specify the remote IP address and
then the port after the colon.
Tick the checkbox to enable the specified rule.
Specify the schedule rule number.
Go back to the previous filter page.
Advance to the next filter page.
41