Inbound Filter - D-Link DSL-2740M User Manual

Section 3 - Configuration
Click Inbound Filter on the navigation menu to configure the Inbound Filter. The Inbound
Filter allows you to place filtering rules on a per IP basis. Using this tool you may restrict
access to or block traffic from a specific remote IP address or range.
Filter Name: Enter a name for this Inbound Filter.
Protocol: Select TCP, UDP, or ICMP from the dropdown menu.
Source IP address: Enter the source IP address.
Source Subnet Enter the source subnet mask.
Mask:
Source Port: Enter the source port.
Destination IP Enter the destination IP address.
address:
Destination Subnet
Enter the destination subnet mask.
Mask:
Destination Port:
Enter the destination port.
Click the Add/Apply button to add your Inbound IP Filter Rule.
The currently defined Inbound Filter rules are listed here. Click Remove to remove a defined
rule.
D-Link DSL-2740M User Manual

Inbound Filter

ADD INBOUND IP FILTER
ACTIVE INBOUND FILTER
Inbound Filter INBOUND IP FILTER
ADVANCED
52