Mac Address Filter - D-Link DWR-512 User Manual

Section 3 - Configuration
The MAC (Media Access Controller) Address Filter option is used to control network access based on the MAC Address of the network
adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW
or DENY network/Internet access. After modifying any settings, click Save Settings to save your changes.
MAC Address Control:
Connection Control:
Association Control:
ID:
MAC Address:
IP Address:
Wake On LAN:
C:
A:
D-Link DWR-512 User Manual

MAC Address Filter

MAC FILTERING SETTINGS
Tick this box to enable MAC Filtering.
Wireless and wired clients with C selected
can connect to this device and allow/deny
connections from unspecified MAC addresses.
Wireless clients with A selected can associate to
the wireless LAN and allow/deny connections
from unspecified MAC addresses.
MAC FILTERING RULES
This identifies the rule.
Specify the MAC Address of the computer to be filtered.
Specify the last section of the IP address.
Click Trigger to configure Wake On LAN.
If this box is ticked, the rule will follow the
connection control setting specified in MAC
filtering settings specified above.
If this box is ticked, the rule will follow the
association control setting specified in MAC
filtering settings specified above.
38