Configuration; Web-Based Configuration Utility - D-Link DWR-512 User Manual

Section 3 - Configuration

Configuration

This section will show you how to configure your new D-Link mobile router using the web-based configuration utility.

Web-based Configuration Utility

To access the configuration utility, open a web-browser such as Internet Explorer and
enter the IP address of the router (192.168.0.1 by default).
To log in to the configuration utility, enter admin as the username, and then enter the
password. By default, the password is blank.
If you get a Page Cannot be Displayed error, please refer to the Troubleshooting
section for assistance.
The configuration utility will open to the STATUS > DEVICE INFO page. You can view
different configuration pages by clicking on the categories at the top of the screen
(SETUP/ADVANCED/TOOLS/STATUS/SUPPORT), and then selecting a configuration
page from the bar on the left side.
The following pages will describe each section in detail, starting with the SETUP pages.
D-Link DWR-512 User Manual 9