Wireless Settings - D-Link DWR-512 User Manual

Section 3 - Configuration
This page lets you set up your wireless network and choose a wireless security mode. After modifying any settings, click Save Settings
to save your changes.
Enable Wireless:
Wireless Network
Name:
802.11 Mode:
Auto Channel Scan:
Wireless Channel:
Visibility Status:
D-Link DWR-512 User Manual

Wireless Settings

Select this checkbox to enable wireless access. When
you set this option, the following parameters take effect.
Also known as the SSID (Service Set Identifier), this
is the name of your Wireless Local Area Network
(WLAN). Enter a name using up to 32 alphanumeric
characters. The SSID is case-sensitive.
B/G mixed: Enable this mode if your network
contains a mix of 802.11b and 802.11g devices.
N only: Enable this mode if your network
only has 802.11n devices.
B/G/N mixed: Enable this mode if you have a mix
of 802.11n, 802.11g, and 802.11b clients.
Enabling this feature will allow the router to scan
for the best channel to use automatically.
A wireless network uses specific channels in the wireless
spectrum to handle communication between clients.
Some channels in your area may experience interference
from other electronic devices. Choose the clearest
channel to help optimize the performance and coverage
of your wireless network, or enable Auto Channel Scan
for the router to automatically select the best channel.
This setting determines whether the SSID will be Visible
or Invisible to wireless clients looking for wireless
networks. Setting this to Invisible can increase the
security of your network by hiding it, but clients will need
to manually enter the SSID of your network to connect.
24