Dhcp Server Settings - D-Link DWR-512 User Manual

Section 3 - Configuration
The DWR-512 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the
network that request them. By default, the DHCP Server is enabled on the device. The DHCP address pool contains a range of IP addresses,
which is automatically assigned to the clients on the network. After modifying any settings, click Save Settings to save your changes.
Enable DHCP Server:
DHCP IP Address
Range:
DHCP Lease Time:
Primary DNS IP
Address:
Secondary DNS IP
Address:
Primary WINS IP
Address:
Secondary WINS IP
Address:
D-Link DWR-512 User Manual

DHCP Server Settings

Select this box to enable the DHCP server on your router.
Enter the range of IPs for the DHCP server to use to
assign IP addresses to devices on your network.
Enter lease time for IP address assignments.
Enter the primary DNS IP Address that
will be assigned to DHCP clients.
Enter the secondary DNS IP Address that
will be assigned to DHCP clients.
Enter the primary WINS IP Address that
will be assigned to DHCP clients.
Enter the secondary WINS IP Address that
will be assigned to DHCP clients.
31