Mac Address Filter - D-Link SharePort DIR-506L User Manual

Section 3 - Configuration
Use Media Access Control (MAC) Filter to control access to your network based on the MAC addresses of connected clients. You
can set MAC address filtering to only allow the listed MAC addresses to connect or block access to all listed MAC addresses.
After making your changes, click the Save Settings button.
MAC Address
Control: Click Enable to allow MAC filtering.
Connection
When this option is selected, only PCs and devices with MAC
Control: addresses listed below with the 'C' option checked can connect
to the router. The drop-down menu will allow you to choose
whether all other MAC addresses that are not in the list will be
blocked or allowed to connect.
Association
When this option is selected, only PCs and devices with MAC
Control: addresses listed below with the 'A' option checked can associate
themselves with the wireless LAN. The drop-down menu will
allow you to choose whether all other MAC addresses that are
not in the list will be blocked or allowed to associate.
MAC Address:
Enter the MAC addresses you would like to filter and then select
whether you want them in the 'C' (Connection Control) group,
the 'A' (Association Control) group, or both. If the control groups
are not enabled, these designations will be ignored.
D-Link DIR-506L User Manual

MAC Address Filter

49