Configuring Wireless Network; Example Of Wireless Settings - D-Link DIR-815 Quick Installation Manual

Wireless n600 dual band router

Hide thumbs Also See for DIR-815:

Table of Contents

DIR-815

Configuring Wireless Network

By default, the wireless network of the router is open (it requires no password

to access it). To avoid unauthorized access to your wireless local area network,

change the default settings of the router.

1. Go to the Wi-Fi / Security settings page.

2. Go to the tab corresponding to the used range of the wireless network

(2.4 GHz or 5 GHz).

3. Select the WPA2-PSK value from the Network Authentication drop-

down list.

4. Enter a key (a password that will be used to access your wireless

network) in the Encryption Key PSK field. Use digits and Latin

characters.

5. Select the AES value from the WPA Encryption drop-down list.

6. Click the Change button.

7. If needed, specify your own security settings for the other range of the

wireless network.

If you perform initial configuration of the router via Wi-Fi connection,

note that immediately after changing the wireless default settings you

will need to reconfigure the wireless connection using the newly

specified settings.

Quick Installation Guide

Table of Contents