Download Print this page

Craftsman 973.271600 Owner's Manual

3/8 in. professional cordless drill driver variable speed/reversible
Hide thumbs

Advertisement

Quick Links

Owner's Manual
iP
R
0
F E S
S
I
0
N A L i
3/8 in. PROFESSIONAL
CORDLESS DRILL-DRIVER
Variable Speed / Reversible
Model No.
973.271600
Save this manual
for
future reference
,_
CAUTION:
Read and
follow all Safety Rules and
Operating Instructions before
first use of this product.
Customer
Help Line:
1-800-932-3188
Sears,
Roebuck
and Co.,
Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
972000-754
4-00
• Safety
• Features
• Assembly
• Operation
• Maintenance
• Parts List
®

Advertisement

loading

  Related Manuals for Craftsman 973.271600

  Summary of Contents for Craftsman 973.271600

  • Page 1 • Features Operating Instructions before • Assembly first use of this product. • Operation • Maintenance Customer Help Line: 1-800-932-3188 • Parts List ® Sears, Roebuck and Co., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 972000-754 4-00...
  • Page 2 TABLE OF CONTENTS • General Safety Rules ..............................• Specific Safety Rules/Symbols ..........................• Features ..................................• Assembly ..................................• Operation ................................10-14 • Maintenance ................................• Accessories ................................. • Exploded View And Repair Parts List ......................... • Parts Ordering / Service .............................. Personal Safety WARNING:...
  • Page 3 Tool Use and Care Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp • Use clamps or other practical way to secure and cutting edges are less likely to bind and are easier to support the workpiece to a stable platform.
  • Page 4 Important c. That wire size is large enough forAC ampere Safety Instructions For Charger rating of charger as specified below: • Save these instructions. This manual contains Cord Length (Feet) 100' important safety and operating instructions for battery charger item number 9-11040 (981399-001). Cord Size (AWG) Following this rule will reduce the risk of electric Note: AWG = American Wire Gage...
  • Page 5 SYMBOLS SYMBOL NAME DESIG NATION/EXPLANATION Velts Voltage Amperes Current Hertz Frequency (cycles per second) rain Minutes Time Alternating Current Type or a characteristic of current --=- Direct Current Type or a characteristic of current No Load Speed Rotational speed, at no load .../min Revolutions or Reciprocation Per Minute Revolutions, strokes,...
  • Page 6 KNOW YOUR DRILL-DRIVER WRIST STRAP See Figure 1. A wrist strap is provided to reduce the chances of dropping Before attempting to use your drill-driver, familiarize your drill-driver. Place one hand through the wrist strap yourself with all operating features and safety when carrying tool.
  • Page 7 TWO SPEED LEVEL GEARTRAIN(HI-LO) KEYLESS CHUCK BITSTORAGE AREA YELLOWLIGHT"ON" ANDRED LIGHTFLASHING INDICATES DEFECTIVE BATTERY PACK DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE) TORQUE CHARGER ADJUSTMENT SWITCH RING TRIGGER BATTERY PACK GREENLIGHT"ON" INDICATES FULLY CHARGED ANDSLOWCHARGING TOMAINTAIN BATI'ERY PACK :IVERBITS WRISTSTRAP Fig. 1 CHARGER See Figure 2.
  • Page 8 INSTALLINGBITS ,_WARNING: Do not insert drill bit into chuck jaws See Figure 3. and tighten as shown in Figure 4. This could cause • Lock the switch trigger by placing the direction of drill bit to be thrown from drill resulting in possible rotation selector in center position.
  • Page 9 TO ATTACH BATTERY PACK TO DRILL TO REMOVE BATTERY PACK FROM DRILL See Figure 5. See Figure 6. Note: Battery pack is shipped in a low charge condition. • Lock the switch trigger by placing the direction of Therefore, it must be charged prior to use. Refer to page 10, rotation selector in center position.
  • Page 10 If after one hour red light is still flashing, this indicates a WARNING: Always wear safety goggles or safety defective battery pack and should be replaced. glasses with side shields when operating tools. Failure to do so could result in objects being thrown Green light on indicates battery pack is fully charged into your eyes, resulting in possible serious injury.
  • Page 11 SWITCH LOCK SWITCH See Figure 10. See Figure 8. The switch trigger can be locked in the OFF position. This To turn your drill ON, depress the switch trigger. To turn it feature can be used to prevent the possibility of accidental OFF, release the switch trigger.
  • Page 12 KEYLESS CHUCK ADJUSTING RING TODECREASE See Figure 11. TORQUE A keyless chuck has been provided with your drill to allow for easy installation and removal of bits. As the name implies, you can hand tighten or release drill bits in the chuck jaws.
  • Page 13 DRILLING APPLICATIONS See Figure 15. (Use drill-driver only for the purpose listed below) • Drilling in wood. LEVEL • Drilling in ceramics, plastics, fiberglass, and lami- nates. • Drilling in both hard and soft metals. • Using driving accessories, such as driving screws with screwdriver bits.
  • Page 14 CHUCK REMOVAL Insert hex key wrench in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a counter- See Figures 16, 17, and 18. clockwise direction. This will loosen chuck on the The chuck must be removed in order to use some spindle.
  • Page 15 De not abuse power tools. Abusive practices can WARNING: When servicing use only identical Craftsman replacement parts. Use of any other damage tool as well as workpiece. parts may create a hazard or cause product damage. Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer.
  • Page 16 Thefollowing recommended accessories arecurrently a vailable atSearsRetail S tores. • 17-Pc. Power Screwdriver/Nutdriver Set and Case • 6-Pc. Extra Length Magnite Power Bit Set • High Speed Bits (For Wood or Metal)..3/4 in. Max. • 30-Pc. Power Screwdriver/Nutdriver Set and Case WARNING: The use of attachments or accessories not listed might be hazardous.
  • Page 17 NO. 973,271600 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CRAFTSMAN 3/8 in. PROFESSIONAL CORDLESS DRILL-DRIVER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING...
  • Page 18 CRAFTSMAN 318 INCH PROFESSIONAL CORDLESS DRILL-DRIVER - MODEL NUMBER 973.271600 /F19_ "".__,...
  • Page 19 CRAFTSMAN 318 INCH PROFESSIONAL CORDLESS DRILL-DRIVER - MODEL NUMBER 973.271600 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence 3/8 INCH PROFESSIONAL CORDLESS DRILL-DRIVER or when ordering repair pads.
  • Page 20 CRAFTSMAN 318 INCH PROFESSIONAL CORDLESS DRILL-DRIVER - MODEL NUMBER 973.271600 MOTOR RED MOTORLEAD BLACKMOTORLEAD BLACKNO. 7 REDNO. 4 HOLE BLACKNO.1 HOLE BLUENO. 6 HOLE PLATE THERMALPROTECTOR YELLOWNO. 2 HOLE BLACKNO.5 HOLE CONTACTPLATE REDNO.3HOLE WIRING DIAGRAM...
  • Page 21 In U.S.A. or Canada for in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME sM (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 Au Canada pour tout le service ou les pi_ces - 1-800-469 4663 For the repair or replacement parts you need: Call 6 a.m.