Table of Contents
Advertisement
(3)
Sequential read
When the disk drive receives the read command that targets the sequential address to the
previous read command, the disk drive tries to fill the buffer space with the read ahead data.
a. Sequential command just after non-sequential command
1)
At receiving the sequential read command, the disk drive sets the DAP and HAP to
the sequential address of the last read command and reads the requested data.
2)
The disk drive transfers the requested data that is already read to the host system with
reading the requested data.
Mis-hit data
3)
After completion of the reading and transferring the requested data to the host system,
the disk drive performs the read-ahead operation continuously till a certain amount of
data is stored.
6 - 16
Mis-hit data
Mis-hit data
C141-E072-01EN
HAP
Empty data
DAP
HAP
Requested data
DAP
HAP
Requested data
Empty data
Read-
Empty
ahead
data
data
DAP
Advertisement
Table of Contents
