Static Route - D-Link DSA-3100 - Airspot - Gateway User Manual

DSA-3100 Airspot Public/Private Gateway User Manual
Figure 4-52

6. Static Route

In the above example, if you want the 192.168.202.0/24 and 192.168.100.0/24 network to
have access to each other, you should add a static route in the DSA-3100 and also in the
192.168.200.253 IP Router. The following settings show the DSA-3100's static route
configurations.
Following settings show the DSA-3100's static route configurations:
Destination Network ID: Specifies the target network or host IP. In this example we use
network 192.168.202.0 as the routed target.
Destination Subnet Mask: Specifies the target subnet mask. In the example, we use the
subnet mask 255.255.255.0.
Gateway IP Address: Specifies the IP address of the next hop router .In the example, we
set this to 192.168.0.253 as the 192.168.202.0 network is behind the router.
Defining Free Surfing Area Hosts
49