D-Link DSA-3100 - Airspot - Gateway User Manual page 41

Airspot public/private gateway
Hide thumbs Also See for DSA-3100 - Airspot - Gateway:
Table of Contents

Advertisement

DSA-3100 Airspot Public/Private Gateway User Manual
Guest Account: Select Enable to activate Guest Account for visitors.
Guest Accounts List: Up to 10 guest accounts could be defined. To activate a particular
Guest Account, simply enter the corresponding password in the "Password" column and
click Apply, and then Save All.
Guest Account ACL: Define network areas where Guest Account is disallowed access,
for instance 10.2.3.0/24, Network ID is 10.2.3.0, Subnet Mask is 255.255.255.0.
Please refer to the definition of Session Length, Idle Timer, Bandwidth
Limitation and Guest Login Schedule as described above for General Account.
Note: To let the functions take effect, you need to click Apply, and then Save All after
Enable is selected.
MAC Address Control: When MAC Address Control is enabled, users connected to Public
LAN Port cannot login to DSA-3100 unless they have registered their MAC Address at MAC
ACL Control (Figure 4-33a, 4-33b). In other words, only 40 users will be allowed to login
when this function is enabled. Please refer to configuration screen as follows.
Figure 4-33 MAC Address Control
Note: MAC address format is XX:XX:XX:XX:XX:XX or XX-XX-XX-XX-XX-XX. Newly
created user account will be valid instantly. Restart of the DSA-3100 is not necessary (as
shown below).
Figure 4-33a
34
MAC ACL Control

Advertisement

Table of Contents
loading

Table of Contents