D-Link DSA-3100 - Airspot - Gateway User Manual page 59

DSA-3100 Airspot Public/Private Gateway User Manual
Caution: If choosing "All", user won't be able to select Start/End Port of Source/Destination field.
Table 4-4 IP Filter/Firewall page Filter and Description
Filter
Name
Check to enable this rule Enable this rule if it be marked¡ C
Action
Protocol
Source MAC
Source/Destination IF
Source/Destination IP
Address
Source/Destination
Subnet Mask
Source/Destination
Operator
Source/Destination Start
Port
Source/Destination End
Port
52
To give a name to IP Filter rule¡ C
Specifies the action to be taken when packets match the rule
Block¡ G Packets matching the rule will be dropped
immediately¡ C
Pass ¡ G Packets matching the rule will be passed immediately ¡ C
Specifies the protocol(s) this filter rule will apply to¡ C
Source MAC address¡ C
Source/Destination Interface. You can select WAN
port(WAN) or Private LAN port(PriLN) or Public LAN port
(PubLN) or ALL(ALL) port¡ C
Source/Destination IP address¡ C
Source/Destination Subnet Mask¡ C
Select =(equal)¡ B != (not equal)¡ B >(greater than)¡ B <(smaller
than) operator rule¡ C
Source/Destination Start Port¡ C
Source/Destination End Port¡ C
Description