Printing In Netware - Dell 2355dn Multifunction Mono Laser Printer Network Manual

Printing in NetWare

To print to your network printer on a NetWare workstation, you need to add a
print queue.
NOTE:
To use bindery emulation, you must log on to a Bindery server as an
administrator. In the NDS mode, log on to target text of the NDS tree where you
have administrator privileges.
Adding a queue
Open the NWADMIN dialogue box by double clicking on the NetWare
1
Client.
Right-click CONTEXT, then choose the create menu.
2
You will need to create all of the following items:
3
• Printer Server: represents a network print server.
• Printer: represents a network printing device.
• Printer Queue: represents a network print queue.
NOTE:
The New Object dialogue box lets you choose the class of object to create.
Double-click each tree print object and select Assignments menu.
4
Click Add.
5
The print server object which was created in Step 3 has a link assigned to the
printer object and the printer object a link to the print queue object.
Adding a printer
Select Add Printer from the Printer and fax menu in the control panel.
1
Select Network Printer and click Next.
2
Select Novell Directory Service, and then click the context tree and an
3
existing printer object name.
Click Next.
4
If the server does not provide the printer driver or there is no one available
5
on the network, a dialogue box appears to allow users to select a printer
driver. Select the driver and click Next.
Install the printer driver by following the onscreen instructions.
6
Appendix E. Netware environment
39