Dell 2355dn Multifunction Mono Laser Printer Network Manual page 18

Or,
• Temporarily connect one end of the supplied Ethernet cable to the
printer and the other to your wireless enabled computer. You may need
to change your PC network IP settings to communicate with the
printer.
NOTE:
checking on the availability of BOOTP or DHCP. If no DHCP or BOOTP exists on
the network, the printer will automatically assign an IP address (192.0.0.192) or
a local IP address (169.254.xxx.xxx).
Print a Configuration Page and identify the printer's IP address
2
For Dell 5330dn Mono Laser:
Press Menu (
a
Press Scroll (
b
Press Scroll (
c
Select ( ).
The printer Configuration Page is printed.
d
For Dell 2335dn MFP:
On the main menu of the operator panel, scroll to Setup using
a
Scroll ( or ) and press Select ( ).
On the Setup menu, scroll to Reports using Scroll (
b
press Select ( ).
On the Reports menu, scroll to Network Settings using Scroll (
c
or
The printer Configuration Page is printed.
d
For Dell 2355dn MFP:
Press Setup
a
Press the Next (
b
Press the up/down arrows to select Reports.
c
Press the up/down arrows to select Network Settings.
d
The printer Configuration Page is printed.
e
16
This guide can be used for Dell™ laser printers 5330dn, 2335dn, and 2355dn
See page 20 for instructions.
Upon powering on, Dell printers attempt to retrieve an IP address by
).
or ) to highlight Reports and press Select ( ).
or ) to highlight Network Settings and press
) and press Select ( ).
Machine Setup from the home screen.
) button.
or ) and