Appendix C. Printing Protocols; Standard Tcp/Ip Port - Dell 2355dn Multifunction Mono Laser Printer Network Manual

Appendix C. Printing protocols

Before setting the network printing ports, you must install the printer driver
with the local port (LPT) on the system. Refer to your printer/MFP user's
guide.

Standard TCP/IP port

You can print your documents to your network printer by creating a Standard
TCP/IP port.
Configuring Standard TCP/IP in Windows 2000/XP/Server 2003/Server
2008/Vista/7/Server 2008 R2
You can enable or disable the Standard TCP/IP Printing port through EWS
(Embedded Web Service).
You can also change the port number of the Standard TCP/IP port. The
default port number is 9100.
Creating a Standard TCP/IP port
For Windows 2000, click the Start button
1
For Windows XP/ Server 2003, click the Start button and point to Printers
and Faxes.
For Windows Vista/Server 20008, click the Start button and click Control
Panel Hardware and Sound
For Windows 7, click the Start button and click Control Panel
Hardware and Sound
For Windows Server 2008 R2, click the Start button and click Control
Panel Hardware
Click Add a printer or double-click Add Printer, and then Next.
2
Click Local printer attached to this computer or Local printer and then
3
Next.
Make sure that Automatically detect and install my Plug and Play printer.
is not selected.
Click Create a new port, select Standard TCP/IP port from the Type of
4
port list, and click Next.
Click Next.
5
Printers.
Devices and Printers.
Devices and Printers.
Appendix C. Printing protocols
Settings Printer.
30