Filter - American Audio DIGI-PRO Operating Instructions Manual

ADVANCED OPERATIONS CONT.
4. FILTER OPERATION - Once the filter has been engaged, use
the PITCH SLIDER (23) to change the type of filer being applied.
The filter parameters range from -12.7 to +12.7. The filter will
automatically return to the default setting when you stop moving
the PITCH SLIDER (23).
6. FILTER LOOP FUNCTION - To lock the filter in a loop, press
the FILTER/COAST/ADJUST BUTTON (1) while in the filter effect
mode. This function will lock the filter effect in a continuos effect
until the FILTER/COAST/ADJUST BUTTON (1) is disengaged.
FILTER EFFECT: The filter is a type of dampening effect that
tweaks with the harmonics of a track. This effect uses a low and
high filter to distort the an audio track. The effect works with both
the low and high filters simultaneously.
To activate the FILTER effect be sure the DTA/FX BUTTON (22)
is off and press the FILTER BUTTON (3).
is selected the "1" icon displays in the LCD (14).
Figure 39
5. FILTER PARAMETER HOLD - To lock the filter at a specific
parameter press the PRG/HOLD FX BUTTON (13). This will
engage the hold function which will lock your desired filter
parameter and set a new default value. Your default value will be
erased once the unit is powered off.
Figure 41
7. FILTER TIME PARAMETER - The filter effect has an adjustable
time parameter of 10msec to 9.9 seconds. This is the amount of
time it takes the filter to cycle through the low and high pass filters.
This parameter can be adjusted at any time once the filter effect
has been activated, by turning the jog wheel in either direction.
Figure 43
American Audio • DIGI-PRO™ INSTRUCTION MANUAL • PAGE 27
®
Figure 40
Figure 42
When the FILTER effect