Table of Contents
Advertisement
BASIC OPERATIONS (CONT.)
Figure 24
EXITING A LOOP
- To exit a SEAMLESS LOOP, press the OUT/EXIT
BUTTON (28). The IN REAL-TIME CUE BUTTON (26) and OUT/EXIT
BUTTON (28) LEDs will remain on, but will stop flashing. Music
playback will resume normal play (Figure 25). The IN REAL-TIME CUE
BUTTON (26) and OUT/EXIT BUTTON (28) LEDs will remain on to
remind you that a loop is stored in memory.
Figure 26
15. EDITING A LOOP:
Please note only the ending point of a loop may be edited, a loop may be made shorter or longer. Before
you can edit your seamless loop you obviously must first have created a seamless loop to edit. If you haven't
created a SEAMLESS LOOP, follow the instructions in step 10. If a SEAMLESS LOOP has already been
created, press the RELOOP/BOP BUTTON (30) to activate your SEAMLESS LOOP (Figure 26), if it is not
already playing. To edit a loop's ending point:
1) Press the OUT/EXIT BUTTON (28) to return to normal play from the loops cue point (Figure 25). This will
disengage the SEAMLESS LOOP and allows you to edit the loops ending point.
2) Press the OUT/EXIT BUTTON (28) again when you reach your new ending point (Figure 25).
- FOR A SHORTER LOOP: Press the OUT/EXIT BUTTON (28) at sooner point in the track (Figure 25).
- FOR LONGER LOOP: Press the OUT/EXIT BUTTON (28) at later point in the track (Figure 25).
3) Press the OUT/EXIT BUTTON (28) to set the ending point for your
SEAMLESS LOOP (Figure 13). The IN REAL-TIME CUE BUTTON
(26) and OUT/EXIT BUTTON (28) LEDs will begin to flash indicating
SEAMLESS LOOP mode has been activated.
LOOP INDICATORS
RELOOP (64) INDICATORS will light in the LCD (14) indication a loop
is active.
REPLAY LOOP
your stored loop at any time. The IN REAL-TIME CUE BUTTON (26)
and OUT/EXIT BUTTON (28) LEDs will indicate a loop is stored in
memory, and may be played at any time. To replay the loop, press the
RELOOP/BOP BUTTON (30). The IN REAL-TIME CUE BUTTON (26)
and OUT/EXIT BUTTON (28) LEDs will again begin to flash indicating
SEAMLESS LOOP mode has been activated (Figure 26) and your
stored loop will immediately begin to play.
American Audio
• DIGI-PRO™ INSTRUCTION MANUAL • PAGE 22
®
- During a seamless loop, the LOOP (65) and
Figure 25
- The RELOOP (30) function allows you to return to
Advertisement
Table of Contents
