Pitch Bending - American Audio DCD-PRO310 Operating Instructions Manual

BASIC OPERATIONS (CONT)
PITCH BEND:
10.
This function will momentarily increase or decrease a tracks playback speed. There are two ways to operate
this function with the (-) & (+) PITCH BUTTONS (14) or with the JOG WHEEL (1). The maximum pitch bend
percentage allowed is +/- 16%. The pitch bend function will work in conjunction with the PITCH SLIDER (3)
pitch setting.
PITCH BEND BUTTONS (14):
The (+) PITCH BEND BUTTON (14) will provide a speed bump and the (-) PITCH BEND BUTTON (14) will
provide a slow down. The maximum range of the PITCH BEND BUTTONS is 16%. The extent to which the
speed changes is proportionate to the amount of time the button is pressed. For example, if the (+) PITCH
BEND BUTTON (14) is held down continuously, the disc speed will increases and will continue to increase until
reaches a maximum of 16% speed gain. When you release the (+) PITCH BEND BUTTON (14) the disc speed
ally return to
will automatic
TRACK
Figure 13
Holding down or tapping on the
(-) PITCH BEND BUTTON (14) will
provide a slow down in the play-
back pitch.
American Audio
©
it's previous speed.
PROG.
SINGLE
TOTAL
REMAIN
M S F
S G L
C T N
T IME P IT C H
PROG.
SINGLE
TOTAL
REMAIN
TRACK M S F
S G L
C T N
T IME
Figure 15
- www.americanaudio.us - DCD-PRO310™ Instruction Manual Page 16
®
Holding down or tapping on the (+) PITCH
BEND BUTTON (14) will provide a speed
bump in the playback pitch.
JOG WHEEL (1):
The JOG WHEEL (1) will temporarily bend the pitch
if a track is in play mode Rotating the wheel in a
clockwise direction will increase your track pitch and
rotating the wheel in a counter-clockwise direction
P IT C H
will slow your track pitch. The speed you rotate the
JOG WHEEL (1) will determine pitch bend percentage
(%).
PROG.
SINGLE
TOTAL
REMAIN
TRACK M S F
S G L
C T N
TIME
PROG.
SINGLE
TOTAL
REMAIN
TRACK M S F
S G L
C T N
T IME
Figure 14
PROG.
SINGLE
TOTAL
REMAIN
TRACK M S F
P IT C H
P IT C H
S G L
C T N
TIME P IT C H