Pitch Bending - American Audio CK 1000Mp3 User Manual

PITCH ADJUSTmENTS

2. PITCH BENDING:

Unlike the pItcH SlIdEr (5) adjustment t
during playback. There are two ways to operate this function, with the (-) & (+) pItcH BEnd ButtonS (9) or
with the jog WHEEl (12). The maximum pitch bend percentage allowed is +/- 16%. The pitch bend func-
tion will work in conjunction with the pItcH SlIdEr'S (5) pitch setting. For example, if the pItcH SlIdEr (5)
is set to a 2% pitch gain the pitch bending process will begin at 2% and wi
+
/- 16%.
PITCH BEND BUTTONS (9):
The (+) pItcH BEnd Button (9) will increase track playback speed and the (-) pItcH BEnd Button (9) will
decrease track playback speed. The extent to which the speed changes is proportionate to the amount of time
the button is pressed. For example, if the (+) pItcH BEnd Button (9) is held down continuously as in figure
26, the disc speed will increase and will continue to increase until it reaches a maximum of 16% speed gain.
When you release the (+) pItcH BEnd Button (9) the disc speed will automati
speed.
©
Adjusting the PITCH SLIDER'S RANGE:
SlIdEr'S (5) operating range at any time. To change the operating range
be sure the pitch function is turned on, see figure 22. The pitch percent-
age range can be changed between +/-4%, +/-8%, and +/-16%. 4% will
allow the least amount of pitch manipulation and 16% will allow the most
amount of pitch manipulation. To adjust the different ranges, press the
pItcH on/off Button (6) and tap on the pItcH rangE Button (7)
until your desired value is reached, see figure 40.
Figure 24
Holding down or tapping on the (+)
pItcH BEnd Button (9) will provide
a speed bump in the playback pitch.
Figure 26
American Audio - www.AmericanAudio.us - CK 1000Mp3 Instruction Manual Page 23
®
his function will momentarily increase or decrease a tracks speed
Holding down or tapping on the (-)
pItcH BEnd Button (9) will provide
a slow down in the playback pitch.
You may change the pItcH
ll continue to the maximum of
Figure 25
ally return to
c
it's previous set