Disconnecting The Camera - FujiFilm Finepix S3000 Owner's Manual

7.1 CAMERA CONNECTION

7.1.4 Disconnecting the camera

1
Perform the steps shown below before you switch the camera off. This procedure differs depending on
2
the operating system software (or PC) you are using.
Windows 98/98 SE
No PC operation is needed.
Windows Me/2000 Professional/XP
1 Right-click the removable disk icon in the "My Computer"
window and select Eject. This step is only required in
Windows Me.
102
1 Quit all applications (FinePixViewer etc.) that are
using the camera.
2 Check that the indicator lamp is lit green (no data is
being exchanged with the computer).
2
For a DSC connection, proceed to step .
3
For a PC CAMERA connection, proceed to step
G
!
Even when "Copying" is no longer displayed on the computer,
the camera and the computer may still be exchanging data.
Always check that the indicator lamp is lit green.
2 Left-click the Eject icon in the taskbar and select "USB
Disk".
3 The menu option shown below appears. Click on this
option.
.
4 The "Safe To Remove Hardware" message box appears. Click the [OK] button or the close button.
Macintosh
Drag the "Removable drive" icon on the desktop to the Trash.
G
!
When you drag the icon to the Trash, "
on the camera's LCD monitor.
3
1 0
✽ Screen for Windows Me
✽ Screen for Windows Me
≠ " appears
1 Switch the camera off.
2 0
2 Unplug the USB cable (included) from the camera.
DC IN 5V
socket
(USB)
socket
7
103