Turning On And Off / Setting The Date And Time - FujiFilm FINEPIX FinePix S3500 Owner's Manual

TURNING ON AND OFF / SETTING THE DATE AND TIME

1
2
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＮＯＴ ＳＥＴ ＮＯＴ ＳＥＴ
ＳＥＴ ＳＥＴ
3
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹＹ．ＭＭ．ＤＤ ＹＹＹ
２００４ １ ２００４ １
１２ ： ００ ＡＭ １２ ： ００ ＡＭ
ＳＥＴ ＳＥＴ
0 1
4
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹ ＹＹＹＹ． Ｙ．ＭＭ．ＤＤ
２００４ ． ２００４ ． ７ ．
１２ ： ００ ＡＭ １２ ： ００ ＡＭ
ＳＥＴ ＳＥＴ
To turn the camera on, set the Power switch to "
or "
lamp lights green.
To turn the camera off, set the Power switch to
"OFF".
When first using the camera, the date and time are
cleared. Press the "MENU/OK" button to set the
date and time.
●
!
ＮＯ ＮＯ
●
!
●
!
●
!
1 Press "d" or "c" to select Year, Month, Day,
2 Press "a" or "b" to correct the setting.
ＤＤ
． ． １ １
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2 0
●
!
●
!
Once you have set the date and time, press the
"MENU/OK" button. Pressing the "MENU/OK"
button changes the camera to Photography or
ＤＤ
Playback mode.
． ２３ ２３
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
●
!
w
". When turning the camera on, the indicator
The lens moves when the camera is in "
Photography mode. Take care not to obstruct the
lens.
Obstructing the lens will cause damage and
" " or "
8 9
Take care also not to get fingerprints on the
camera lens as this will result in impaired image
quality in your shots.
If the message (see figure at left) does not appear, refer to
"Correcting the date and time" (➡P.14) and check and correct
the date and time settings.
The message also appears when the batteries have been
removed and the camera has been left for a long period.
To set the date and time later, press the "DISP/BACK" button.
If you do not set the date and time, this message will appear
each time you turn the camera on.
Hour or Minute.
Holding down "a" or "b" changes the numbers continuously.
When the time displayed passes "12:00", the AM/PM setting
changes.
At the time of purchase and after leaving the camera for a
long period with the batteries removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the batteries have been installed for 2
hours or more, the camera settings will be retained for
roughly 6 hours even if both sources of power are removed.
q
"
q
"
" will appear.
1
13