Product Description
Home
Removal & Replacement
REMOVAL & REPLACEMENT
DISASSEMBLY
SEQUENCE
System Board Bracket
Electrostatic
discharge
Service
considerations
Preparation
for
disassembly
Serial number
Hood
Fax-modem
System board
bracket
Serial port
assembly
Mass storage
devices
System board
Power supply
Front bezel
Instant On
button board
Creativity
Action Center
Maintenance and Service Guide
Compaq Presario 4900, 5000, & 5100 Series Computers
Jumper & Switch Information
Troubleshooting
There are ten steps in this procedure.
1
Perform preparation
procedures
2
Remove the hood
3
Remove the fax/modem
CAUTION:
be removed before the system
board bracket, or damage may
occur to the system board.
4
Remove the screws from the top and the side of
the system board bracket and chassis.
NEXT STEP
Illustrated Parts Catalog
Specifications
The fax/modem must