Compaq 5000 - Professional - 32 MB RAM Maintenance And Service Manual page 16

Product Description
Home
Removal & Replacement
Maintenance and Service Guide
Compaq Presario 4900, 5000, & 5100 Series Computers
Jumper & Switch Information
Troubleshooting
REMOVAL & REPLACEMENT
Removing the System Board Bracket,
continued
10 Slide the system board bracket back at an
angle, lining up the pins in the top and bottom
with the hinge opening, then pull the system
board bracket out of the chassis.
END OF SEQUENCE
To replace the system board bracket, reverse this
procedure.
CAUTION:
board bracket, ensure the fingers of the
I/O bracket are properly aligned to
prevent bending the fingers. Bending
the bracket fingers may damage the
system board.
Return to section index
Illustrated Parts Catalog
Specifications
When replacing the system