USE AT DSC MODE
1
Set a camera
1
0
3
0
SET−UP
SET−UP
1
2
DATE/TIME
DATE/TIME
TIME DIFFERENCE
TIME DIFFERENCE
FRAME NO.
FRAME NO.
USB MODE
USB MODE
SET
SET
2
Connect a camera to a PC
Camera
DC IN 5V
socket
(USB)
socket
2
0
4
0
3
:SET
:SET
:SET
:SET
:CONT.
:CONT.
CANCEL
CANCEL
PC
USB socket
1 Insert an xD-Picture Card into the camera.
2 Set the Power switch to turn the camera on.
¶
3 Select "
" in "USB MODE" in the "SET-UP"
menu (➡P.59).
4 Set the Power switch to turn the camera off.
●
!
Use the AC Power Adapter AC-5VH/AC-5VHS (sold separately)
for the connection (➡P.83). If shutting off power supply during
communication, the files on the xD-Picture Card may be
damaged.
1 Turn your PC on.
2 Connect the camera to the PC using the USB
cable (included).
3 Turn the camera on.
●
!
Make sure that the USB cable (included) is connected
correctly and pushed in.
h When the camera and PC are exchanging data,
the self-timer lamp blinks and the indicator lamp
blinks alternately green and orange.
h "
" appears on the screen.
g
h Power save and Auto power off are disabled
during USB connection.
●
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC using the procedure on P.79.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.79 for information on the
disconnection procedure.
6
77
Continued