FujiFilm FINEPIX FinePix S3500 Owner's Manual page 65

Do not connect the camera to your PC until the software installation is completed.
Install FinePixViewer as instructed in the Quick start guide.
1
◆
Launching the installer manually
1 Double-click the "My Computer" icon.
✽ Windows XP users should click "My Computer" in the "Start" menu.
2 Right-click "FINEPIX" (CD-ROM drive) in the "My Computer" window and select "Open".
3 Double-click "SETUP" or "SETUP.exe" in the CD-ROM window.
✽ The way file names are displayed differs as described below depending on your PC settings.
i File extensions (3-letter suffixes indicating the file type) may be shown or hidden. (e.g. Setup.exe or Setup)
i Text may be shown normally or all in uppercase (e.g. Setup or SETUP).
◆
Installing other applications
You may see messages for installing, ImageMixer VCD2 for FinePix and WINASPI. Install these
applications as directed by the on-screen instructions. The installation screens for these applications
are displayed as required.
After restarting the PC, install DirectX as directed by the on-screen instructions and then restart
2
your PC again. If the latest version of DirectX is already installed on your PC, this installation is
not performed.
●
!
If the latest version is already installed, this window does not appear.
●
!
Do not remove the CD-ROM during this procedure.
After restarting, the USB Video Class driver would
3
be installed.
●
!
If the latest version is already installed, this window does not
appear.
●
!
The driver is only installed on Windows XP SP 1.
After restarting the PC, a message appears stating "Installation of the FinePixViewer has been
4
completed".
◆
◆
5
65