Frame No - FujiFilm FINEPIX FinePix S3500 Owner's Manual

4
5
４／２３ ２３／２００

FRAME NO.

CONT.
A A
B B
Formatted xD-Picture Card used for
both A and B.
Directory number
Frame number
４／２３ ２３／２００ ２００４ ３：００ ＰＭ
Ｎ １６ １６
２００４
RENEW
１００−９９９９ １００−９９９９
File number
３：００ ＰＭ
Always press the "MENU/OK" button after the
settings are completed.
When the Photography mode is selected with world
ß
time set, " " appears on the screen for 3 seconds.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
CONT.: Pictures are stored beginning from the
highest file number stored on the last xD-
Picture Card used.
RENEW: Pictures are stored on each xD-Picture
Card beginning with a file number "0001".
Setting this function to "CONT." makes file
management easier as it makes sure that file
names are not duplicated when images are
downloaded to a PC.
●
!
When the camera settings are "
number setting ("CONT." or "RENEW") is changed to
"CONT." and the frame number itself does not return to
"0001".
●
!
When the xD-Picture Card already contains image files with
file numbers higher than the highest file number on the last
xD-Picture Card, images are stored beginning from the
highest file number on the current xD-Picture Card.
Check the file number by viewing the image. The
last 4 digits of the 7-digit number in the top right
corner of the screen are the file numbers, while the
first 3 digits show the directory number.
●
!
When changing the xD-Picture Card, always turn the
camera off before opening the battery cover. Opening the
battery cover without turning the camera off may cause the
frame number memory to not function.
●
!
File number runs from 0001 to 9999. Once 9999 is exceeded,
the directory number changes from 100 to 101. The
maximum number is 999–9999.
●
!
The displayed frame number may differ for images
photographed on other cameras.
●
!
When " " appears, see P.89.
t
q
RESET", the frame
63
4