Use At Dsc Mode - FujiFilm FinePix A607 Owner's Manual

6.3 CONNECTING TO A COMPUTER

USE AT DSC MODE

1
Set a camera
1 0
0 3
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＵＳＢ ＭＯＤＥ ＵＳＢ
言語 ／ＬＡＮＧ
言語
ＶＩＤＥＯ ＳＹＳＴＥＭ ＶＩＤＥＯ ＳＹＳＴＥＭ
ＤＩＳＣＨＡＲＧＥ ＤＩＳＣＨＡＲＧＥ
2
Connect a camera to a PC
Camera
(USB)socket
66
2 0 0 4
１ 2 4
３
ＭＯＤＥ
／ＬＡＮＧ
:
ＥＮＧＬＩＳＨ ＥＮＧＬＩＳＨ
: ＰＡＬ ＰＡＬ
ＯＫ ＯＫ
:
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
(USB)
socket
AC-3V
1 Insert an xD-Picture Card into your camera.
Plug the AC power adapter connector into the
"DC IN 3V" socket on the camera and then plug
the adapter itself into the main power outlet.
2 Press the "Playback" button to turn the camera
on in Playback mode.
3 Set the "USB MODE" setting in the "SET-UP"
¶
menu to "
4 Press the "Playback" button to turn the camera
off.
1 Turn your PC on.
2 Use the USB cable (included) to connect the
camera to your computer.
3 Turn the camera on.
●
!
Take care to ensure that the USB cable (included) is
connected the correct way around and that the plugs are
PC
pushed fully into the connection sockets.
h When the camera and PC are exchanging data,
the self-timer lamp blinks and the viewfinder lamp
blinks alternately green and orange.
≥
h "
" appears on the LCD monitor.
h Power save and Auto power off are disabled
during USB connection.
●
!
Before replacing the xD-Picture Card, always disconnect the
camera from the PC using the procedure on P.68.
●
!
Do not disconnect the USB cable when the camera is
communicating with the PC. See P.68 for information on the
disconnection procedure.
" (➡P.48).