FujiFilm FINEPIX FinePix S3500 Owner's Manual page 90

Warning Displays
Warning Displayed
90
Explanation
i The played back file was not
recorded correctly.
i The xD-Picture Card contact area
is soiled.
i Camera fault.
i An attempt was made to play a
movie that was not recorded on this
camera.
A protected file was encountered.
An attempt was made to trim a 0.3M
image.
i An attempt was made to trim an
image shot using a camera other
than FinePix S3100 / FinePix S3500.
i The image is damaged.
Prints were specified for 1000 or
more frames in the DPOF frame
settings.
An attempt was made to specify
DPOF settings for an image that is
not supported by DPOF or movie.
The camera is not connected to PC
or printer.
Displayed for PictBridge.
Displayed for PictBridge.
Displayed for PictBridge.
Displayed for PictBridge.
Remedy
i Images cannot be played back.
i Wipe the contact area on the xD-Picture
Card with a soft dry cloth. It may be
necessary to format the xD-Picture Card.
If the message still appears, replace the
xD-Picture Card.
i Contact your FUJIFILM dealer.
i Movies cannot be played back.
Protected files cannot be erased. Remove
the protection.
The image cannot be trimmed.
The image cannot be trimmed.
The maximum number of frames for which
prints can be specified on the same xD-
Picture Card is 999.
Copy the images for which you want to
order prints onto another xD-Picture Card
and then specify the DPOF settings.
DPOF printing cannot be used with this
image format.
i Check that the USB cable is connected
correctly.
i Check that your printer is turned on.
i Check that the printer is not out of paper
or out of ink.
i Turn the printer off briefly and then turn it
back on.
i Refer to the user manual supplied with
your printer.
Check that the printer is not out of paper or
out of ink. Printing automatically restarts
when the error is cleared. If the message
still appears after checking, press the
"MENU/OK" button to restart printing.
i Refer to the user manual for the printer
being used and check whether the printer
supports the JFIF-JPEG or Exif-JPEG
image format. If not, the printer cannot
print the images.
i Movie images cannot be printed.
i Was the image data photographed using
FinePix S3100 / FinePix S3500?
You may not be able to print some images
photographed on other cameras.
This message appears when printing is
performed from a FUJIFILM printer that
supports PictBridge. Refer to the Owner's
Manual for the printer for details.