Warning Displays
Warning Displayed
(Lit red)
(Blinking red)
∂
eThe table below lists the warnings that are displayed on the screen.
Explanation
The camera batteries are low or
completely out of charge.
There is a strong likelihood of camera
shake because the shutter speed is
slow.
Outside the AE continuous range.
The AF (auto focus) cannot work
effectively.
Camera malfunction or fault.
No xD-Picture Card is inserted.
i The xD-Picture Card is not
formatted.
i The xD-Picture Card contact area
is soiled.
i Camera fault.
i The xD-Picture Card contact area
is soiled.
i The xD-Picture Card is damaged.
i The xD-Picture Card format is
incorrect.
i Camera fault.
The xD-Picture Card is full.
i The data could not be recorded due
to an xD-Picture Card error or a
connection error between the xD-
Picture Card and camera.
i The image cannot be recorded as it
is too large to fit in the available
space on the xD-Picture Card.
The frame number has reached
999–9999.
Remedy
Load new or fully charged batteries.
Use flash photography. However, use a
tripod for some scenes and modes.
The picture can be taken, but the correct
brighthess (exposure) will not be obtained.
i If the image is too dark, take the picture at
a distance of around 2 m (6.6 ft.) from the
subject.
i Use AF lock to take the picture.
i Turn the camera on again, taking care not
to touch the lens.
i Turn the camera off and on again. If the
message still appears, contact your
FUJIFILM dealer.
Insert an xD-Picture Card.
i Format the xD-Picture Card on the
camera.
i Wipe the contact area on the xD-Picture
Card with a soft dry cloth. It may be
necessary to format the xD-Picture Card.
If the message still appears, replace the
xD-Picture Card.
i Contact your FUJIFILM dealer.
i Wipe the contact area on the xD-Picture
Card with a soft dry cloth. It may be
necessary to format the xD-Picture Card.
If the message still appears, replace the
xD-Picture Card.
i Contact your FUJIFILM dealer.
Erase some images or use an xD-Picture
Card that has ample free space.
i Re-insert the xD-Picture Card or turn the
camera off and then on again. If the
message still appears, contact your
FUJIFILM dealer.
i Use a new xD-Picture Card.
1 Insert a formatted xD-Picture Card into
the camera.
2 Set "RENEW" as the FRAME NO.
setting in the "SET-UP" menu.
3 Start taking pictures. (The frame
numbers start from "100-0001".)
4 Set "CONT." as the FRAME NO. setting
in the "SET-UP" menu.
89