Dell PowerEdge VRTX User Manual page 95

where <index> is a value between 1–4. CMC uses the index number to distinguish up to four destination email
addresses that can be configured.
5. Specify a destination email address to receive the email alerts:
racadm config -g cfgEmailAlert -o cfgEmailAlertAddress <email address> -i
<index>
where <email address> is a valid email address, and <index> is the index value you specified in step 4.
6. Specify the name of the person receiving the email alert:
racadm config -g cfgEmailAlert -o cfgEmailAlertEmailName <email name> -i
<index>
where <email name> is the name of the person or group receiving the email alert, and <index> is the index
value specified in step 4 and step 5. The email name can contain up to 32 alphanumeric characters, dashes,
underscores, and periods. Spaces are not valid.
7. Setup the SMTP host:
racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr host.domain
where host.domain is the FQDN.
You can configure up to four destination email addresses to receive email alerts. To add more email addresses,
perform tasks in step 2 through 6.
NOTE: The commands in steps 2–6 overwrite any existing settings configured for the index that you specify
(1–4). To determine whether an index has previously configured values, type racadm getconfig -g
cfgEmailAlert — I <index>. If the index is configured, values appear for the cfgEmailAlertAddress
and cfgEmailAlertEmailName objects.
For more information, see the
Reference Guide available at dell.com/support/manuals.
Chassis Management Controller for PowerEdge VRTX RACADM Command Line
95