Dell PowerEdge VRTX User Manual page 113

When you install your systems management software using the
DVD, you can extend the Snap-in by selecting the Active Directory Users and Computers Snap-in option during the
installation procedure. See the
installing systems management software. For 64-bit Windows Operating Systems, the Snap-in installer is located at
<DVDdrive>:\SYSMGMT\ManagementStation\support\OMActiveDirect ory_SnapIn64
For more information about the Active Directory Users and Computers Snap-in, see Microsoft documentation.
Adding CMC Users And Privileges To Active Directory
Using the Dell-extended Active Directory Users and Computers Snap-in, you can add CMC users and privileges by
creating RAC device, association, and privilege objects. To add each object, perform the following:
• Create a RAC device Object
• Create a Privilege Object
• Create an Association Object
• Add objects to an Association Object
Creating RAC Device Object
To create RAC device object:
1. In the MMC Console Root window, right-click a container.
2. Select New → Dell Remote Management Object Advanced.
3. On the New Object page, type a name for the new object. The name must be identical to the CMC name that you
type in the Configuring Active Directory With Standard Schema Using Web
4. Select RAC Device Object and click OK.
Creating Privilege Object
To create a privilege object:
NOTE: You must create a privilege object in the same domain as the related association object.
1. In the MMC Console Root window, right-click a container.
2. Select New → Dell Remote Management Object Advanced.
3. On the New Object page, type a name for the new object.
4. Select Privilege Object and click OK.
5. Right-click the privilege object that you created, and then select Properties.
6. Click the RAC Privileges tab and assign the privileges for the user or group. For more information about CMC user
privileges, see Types of
Creating Association Object
The Association Object is derived from a Group and must contain a Group Type. The Association Scope specifies the
Security Group Type for the Association Object. When you create an Association Object, choose the Association Scope
that applies to the type of objects you intend to add. For example, if you select Universal, the association objects are
only available when the Active Directory Domain is functioning in Native Mode or above.
To create association object:
1. In the Console Root (MMC) window, right-click a container.
2. Select New → Dell Remote Management Object Advanced.
3. On the New Object page, type a name for the new object and select Association Object.
4. Select the scope for the Association Object and click OK.
Dell OpenManage Software Quick Installation Guide for additional instructions about
Users.
Dell Systems Management Tools and Documentation
Interface.
113