Dell PowerEdge VRTX User Manual page 187

Item
Name
Model Number
Service Tag
BIOS Version
Last POST Code
iDRAC Firmware Version
IP4 <enabled, disabled>
IP4 Address: <address, acquiring>
IP6 <enabled, disabled>
IP6 Local Address: <address>
IP6 Global Address: <address>
FlexAddress enabled on Fabrics
The information in the table is dynamically updated. If the server does not support this feature, then the following
information does not appear, else Server Administrator options are as follows:
• Option "None" = No strings must be displayed on the LCD.
• Option "Default" = No Effect.
• Option "Custom" = Allows you to enter a string name for the server.
The information is displayed only if iDRAC has completed booting. For more information on this feature, see the
Command Line Reference Guide for CMC in PowerEdge VRTX .
Description
Name of the server, which the user can set through Dell
OpenManage. The name is displayed only if iDRAC has
finished booting, and the server supports this feature, else
iDRAC booting messages are displayed.
Displays if iDRAC finished booting.
Displays if iDRAC finished booting.
Server BIOS firmware version.
Displays the last server BIOS POST code messages string.
Displays if iDRAC finished booting.
NOTE: iDRAC version 1.01 is displayed as 1.1. There is
no iDRAC version 1.10.
Displays the current IPv4 enabled state.
Only displays if IPv4 is enabled.
Only displays if iDRAC supports IPv6. Displays current
IPv6-enabled state.
Only displays if iDRAC supports IPv6 and IPv6 is enabled.
Only displays if iDRAC supports IPv6 and IPv6 is enabled.
Only displays if the feature is installed. Lists the fabrics
enabled for this server (that is, A, B, C).
RACADM
187