Fcb Snmp Mib - Dell PowerEdge C8000 Hardware Owner's Manual

FCB SNMP MIB

Table 2-22. FCB SNMP MIB
Category Object Name
Common Status
FW Version
Safe Image
FW Version
Asset Tag
Reset
Server IP
File Name
Chassis
Identify
Initiate
Download
Last Update
Status
162
Using the System Setup Program
Read/Write Value Type
read-only values:
ok, error,
safeBoot
read-only string
read-only string
read-write string
read-write value: start
read-write IpAddress
read-write string
read-write integer
read-write value: start
read-only Values:
na,
successfully,
error,
imageError,
start,
downloadIn
Progress,
download
Successfully,
download
Failed,
upgradeIn
Progress
Operation Safe Note
FW Boot FW
v v Firmware Status
v Firmware Version
(OP code)
v v Firmware Version
(Safe Boot code)
v Asset Tag, max string
length is 16 characters
v v Firmware will reset
once this field is set
v v TFTP server IP
v v max string length is
100 characters
v Chassis Identification
v Initiate download
v v Last update status,
firmware will check
header (CRC23) and
image (MD5) before
update, if checksum is
incorrect, this file will
be set as imageError.