Dell PowerEdge VRTX User Manual page 99

Privilege
Test Alert User
Debug Command Administrator
Fabric A Administrator
Fabric B Administrator
Fabric C Administrator
The CMC user groups provide a series of user groups that have preassigned user privileges.
NOTE: If you select Administrator, Power User, or Guest User, and then add or remove a privilege from the pre-
defined set, the CMC Group automatically changes to Custom.
Table 11. CMC Group Privileges
User Group
Administrator
Description
chassis user does not have the Server Administrative privilege on the
chassis.
Server Configuration Administrator:
• Set IP address
• Set gateway
• Set subnet mask
• Set first boot device
Configure Users:
• Set iDRAC root password
• iDRAC reset
Server Control Administrator:
• Power on
• Power off
• Power cycle
• Graceful shutdown
• Server Reboot
User can send test alert messages.
User can execute system diagnostic commands.
User can set and configure the Fabric A IOM.
User can set and configure the Fabric B, which corresponds to the first
mezzanine card in the servers and is connected to the fabric B circuitry in
the shared PCIe subsystem in the main board.
User can set and configure the Fabric C, which corresponds to the second
mezzanine card in the servers and is connected to the fabric C circuitry in
the shared PCIe subsystem in the main board.
Privileges Granted
•
•
•
•
•
•
•
CMC Login User
Chassis Configuration Administrator
User Configuration Administrator
Clear Logs Administrator
Server Administrator
Test Alert User
Debug Command Administrator
99