Oki MC780fx User Manual page 32

Unpacking and Installing the Machine
(3) Flex the stack of paper back and
forth a few times. Then, make a
neat stack by straightening its
edges against a level surface.
1
Note
•
Using paper that is not recommended may
cause the machine to malfunction.
& For details about paper, see
(P.56).
(4)
Load the paper with the side to
2
be printed on face down.
3
4
Mark
Note
•
Load the paper, making sure that it does not
exceed the  mark on the paper guide. (300
pieces at 80g/m2)
(5)
5 Set the paper size dial to match
the size of the paper.
Rotate the paper size dial until
it shows the size of paper
contained in the cassette.
6
"Supported Paper"
The side to be printed
on should be face down.
Set the direction
of the paper.
Paper Size Dial
- 32 -
(6) Close the tray cassette.