Using The Multi-Purpose Tray (Mpt) - Oki MC780fx User Manual

How to Load the Paper
Using the Multi-Purpose Tray
(MPT)
Use the multi-purpose tray (MPT) when
you want to print on plain paper, postcards,
envelopes, OHP film, or labels. The side you
want to print on should be placed face up. After
loading the paper, configure its size, type, and
thickness by using the operator panel.
1
1
Hold the multi-purpose tray (MPT)
on both sides, and fold it down.
2
3
2
Pull the folded paper support
forward between manual guides.
4
5
3
Pull the paper support out.
6
Multi-Purpose
Tray (MPT)
Multi-Purpose
Tray (MPT)
Paper Support
4
Adjust the manual guides to fit the
paper width.
5
Press down the back of the multi-
purpose tray.
6
With the side you want to print on
facing up, insert the edge of the
paper into the back of the multi-
purpose tray (MPT).
Note
•
Loaded paper should not exceed the [ ] mark on the
manual guide. You can load up to 100 pages at 82g/
m .
2
7
Push the blue set button.
Note
•
Do not mix papers of different size, type, or
thickness.
•
When adding paper to the multi-purpose tray, take
out any paper already inserted, then add the extra
paper and realign the paper into a tidy stack.
•
Curled or warped postcards or envelopes may cause
misfeeds. Try to use material that is not curled. Any
curl of 2 mm or more should be corrected.
•
Do not place any material on the multi-purpose tray
other than paper for printing. Do not use excessive
force when raising or pushing the multi-purpose tray.
- 64 -
Manual Guide
Multi-Purpose
Tray (MPT)
Manual Guide
Set Button
(Blue)