Power Save Setting; Format - FujiFilm FinePix F810 Owner's Manual

SET-UP

POWER SAVE SETTING

ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
１
２ ３ ４
： ＯＮ ＯＮ
ＩＭＡＧＥ ＤＩＳＰ． ＩＭＡＧＥ ＤＩＳＰ．
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ
２ ＭＩＮ ２ ＭＩＮ
ＦＯＲＭＡＴ ＦＯＲＭＡＴ ：ＯＫ ：ＯＫ
ＬＣＤ ＬＣＤ
：ＯＮ ：ＯＮ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ ＢＡＣＫ ＢＡＣＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set some time (2 or 5 minutes).
◆
To restore power to the camera
0 1 2 0

FORMAT

ＦＯＲＭＡＴ ＦＯＲＭＡＴ
ＦＯＲＭＡＴ ＯＫ？ ＦＯＲＭＡＴ ＯＫ？
ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ
ＯＫ ＯＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
ＯＫ ＯＫ ＳＥＴ ＳＥＴ
0 1 0 2
88
✽ How to display the SET-UP menu (➡P.85)
When this function is enabled and the camera is
not used for 60 seconds, the screen temporarily
turns off (sleep mode) and the viewfinder lamp
blinks at 1-second intervals to save power. If the
camera remains unused for 2 or 5 minutes, it is
turned off. Use this function when you want to get
the maximum possible running time from your
battery.
●
!
The Power save setting is disabled during automatic
playback and when a USB connection is being used.
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
◆
When the Power save function (2 or 5 minutes
setting) has shut the camera down:
1 Set the Power switch to "OFF".
2 Set the Power switch back to " q " or " w ".
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1 Press "d" or "c" to select "OK".
2 Pressing the "MENU/OK" button erases all the
frames (files) and initializes the xD-Picture Card.
●
!
If " ", " ", "
7 w 0
-
" " appears, see P.118 for information
before formatting the xD-Picture Card.
WORLD TIME ( TIME DIFFERENCE )
This function sets a time difference relative to the date and time currently set. When this setting is
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
1
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＬＯＣＡＴＩＯＮ ＬＯＣＡＴＩＯＮ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
７／ １／２００４ １２：００ ＡＭ ／ １／２００４ １２：００ ＡＭ
ＯＫ ＯＫ
2
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＬＯＣＡＴＩＯＮ ＬＯＣＡＴＩＯＮ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
７／ １／２００４ １２：００ ＡＭ ７／ １／２００４ １２：００ ＡＭ
ＯＫ ＯＫ
1 0
3
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
７／ １／２００４ １２：００ ＡＭ ／ １／２００４ １２：００ ＡＭ
ＯＫ ＯＫ
0 1
" or
Press "d" or "c" to change between "
ß
and " LOCAL".
To set the time difference, select "
å HOME: Your home time zone
ß
LOCAL: Your destination time zone
ＨＯＭＥ ＨＯＭＥ
ＳＥＴ ＳＥＴ
ＳＥＴ ＳＥＴ ＢＡＣＫ ＢＡＣＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
1 Press "a" or "b" to select "TIME DIFFERENCE".
2 Press "c".
ＬＯＣＡＬ ＬＯＣＡＬ
ＳＥＴ ＳＥＴ
ＳＥＴ ＳＥＴ ＢＡＣＫ ＢＡＣＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2 0
1 Press "d" or "c" to select +, –, hour and minute.
2 Press "a" or "b" to correct the setting.
h Available time setting
–23:45 to +23:45 (in 15-minute increments)
００ ： ００ ００ ： ００
ＳＥＴ ＳＥＴ ＢＡＣＫ ＢＡＣＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2 0
å HOME"
ß
LOCAL".
4
Continued 89