Power Save Setting; Format - FujiFilm FinePix S5100 Owner's Manual

SET-UP

POWER SAVE SETTING

ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
1
2 3 4
ＩＭＡＧＥ ＤＩＳＰ． ＩＭＡＧＥ ＤＩＳＰ． ：ＯＮ ：ＯＮ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ ２ ＭＩＮ ２ ＭＩＮ
ＦＯＲＭＡＴ ＦＯＲＭＡＴ ： ＯＫ ＯＫ
ＦＲＡＭＥ ＮＯ． ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ． ：ＣＯＮＴ．
ＯＫ ＯＫ ＳＥＴ ＳＥＴ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set time (2 or 5 minutes).
◆
To restore power to the camera
1 0 2 0

FORMAT

ＦＯＲＭＡＴ ＦＯＲＭＡＴ
ＦＯＲＭＡＴ ＯＫ？ ＦＯＲＭＡＴ ＯＫ？
ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ
ＯＫ ＯＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
ＳＥＴ ＳＥＴ
0 1 0 2
82
✽ How to display the SET-UP menu (➡P.80)
When this function is enabled and the camera is not
used for 60 seconds, the screen temporarily turns
off (sleep mode) and the indicator lamp blinks at 1-
second intervals to save power. If the camera
remains unused for 2 or 5 minutes, it is turned off.
Use this function when you want to get the
maximum possible running time from your batteries.
●
!
The Power save setting is disabled during automatic
playback, discharging and when a USB connection is being
used.
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
◆
When the Power save function (2 or 5 minutes
setting) has shut the camera down:
1 Set the Power switch to "OFF".
2 Set the Power switch back to " q w
" or " ".
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1 Press "d" or "c" to select "OK".
2 Pressing the "MENU/OK" button erases all the
frames (files) and initializes the xD-Picture
Card.
●
!
If " ", " ", "
7 w 0
-
" " appears, see P.111-112 for information
before formatting the xD-Picture Card.
WORLD TIME ( TIME DIFFERENCE )
This function sets a time difference relative to the date and time currently set. When this setting is
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
1
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＬＯＣＡＴＩＯＮ ＬＯＣＡＴＩＯＮ
ＴＩＭＥ Ｄ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
８／２４／２００４ １２：００ ＰＭ ８／２４／２００４ １２：００ ＰＭ
ＯＫ ＯＫ
2
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
ＬＯＣＡＴＩＯＮ ＬＯＣＡＴＩＯＮ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ
８／２４／２００４ １２：００ ＰＭ ８／２４／２００４ １２：００ ＰＭ
ＯＫ ＯＫ
0 1
3
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ＴＩＭＥ Ｄ
＋
８／２４／２００４ １２：００ ＰＭ ８／２４／２００４ １２：００ ＰＭ
ＯＫ ＯＫ
0 1
" or
Press "d" or "c" to change between "
ß
and " LOCAL".
To set the time difference, select "
å HOME: Your home time zone
ß
LOCAL: Your destination time zone
ＨＯＭＥ ＨＯＭＥ
ＦＦＥＲＥＮＣＥ：ＳＥＴ ：ＳＥＴ
ＳＥＴ ＳＥＴ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
1 Press "a" or "b" to select "TIME DIFFERENCE".
2 Press "c".
ＬＯＣＡＬ ＬＯＣＡＬ
ＳＥＴ ＳＥＴ
ＳＥＴ ＳＥＴ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2 0
1 Press "d" or "c" to select +, –, hour and minute.
ＦＦＥＲＥＮＣＥ
2 Press "a" or "b" to correct the setting.
h Available time setting
–23:45 to +23:45 (in 15-minute increments)
００ ： ００ ００ ： ００
ＳＥＴ ＳＥＴ BACK BACK ＣＡＮＣＥＬ ＣＡＮＣＥＬ
2 0
å HOME"
ß
LOCAL".
4
Continued 83