> MANUAL
PHOTOGRAPHY FUNCTIONS
M
10
10
Shutter speed
500 F5.6
500
F5.6
0
1
2
0
10
10
M
Aperture
1000 F8 F8
1000
◆
◆
The exposure indicator
10
10
M
Exposure
indicator
1000
1000 F8 F8
42
>
Set the Mode dial to "
".
Use Manual mode to set any shutter speed and
aperture setting.
Setting the shutter speed
Turn the Command dial to select the shutter speed.
h Shutter speed setting
3 sec. to 1/2000 sec. in 1/3 EV increments
●
!
See P.125 for information on EVs.
●
!
Use a tripod to avoid camera shake.
●
!
In shots with long exposures, noise (dots) may appear on the
image.
●
!
If the shutter speed is set to a speed faster than 1/1000 sec.,
the image may appear dark even if the flash is used.
Setting the aperture
1 Hold down the "
D
" button.
2 Turn the Command dial to select aperture.
h Aperture settings
Wide-angle: F2.8 to F8 in 1/3 EV increments
Telephoto: F5.6 to F8 in 1/3 EV increments
Use the exposure indicator on the LCD monitor as a
guide when setting the exposure.
When the brightness of the subject is outside the
camera's brightness metering range, the indicator
moves to the (+) end to show that the image will be
overexposed (the (+) turns yellow) or to the (–) end to
show that the image will be underexposed (the (–)
turns yellow).
PHOTOGRAPHY FUNCTIONS
e MACRO ( CLOSE-UP )
Select Macro mode to take close-up shots.
1
0
2
0
1 Set the Power switch to "
2 Press the "
AUTO
AUTO
10
10
h Focal range
h Effective flash range
●
When using the viewfinder to take a
●
picture in Macro mode, the field visible
through the viewfinder does not match
●
the field actually photographed because
●
the viewfinder and lens are in different
●
positions. Use the LCD monitor to take
●
pictures in Macro mode.
Available Photography mode:
q
".
e
(d )" Macro button. The "
appears on the LCD monitor indicating that you
can take close-up shots.
e
To cancel Macro mode, press the "
Macro button again.
Approx. 7.5 cm to 80 cm (3.0 in. to 2.6 ft.)
(wide-angle)
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
(wide-angle)
!
Any of following cancels Macro mode:
i Changing the Mode dial setting
i Turning the camera off
!
If the flash is too bright, use flash brightness adjustment
(➡P.63).
!
Use a tripod to avoid camera shake when shooting in the
dark (when "
|
" appears).
!
Once the LCD monitor is turned on and cannot be turned off.
!
Canceling Macro mode, the LCD monitor remains on.
!
Selecting AF (MULTI), the focusing position remains near the
center of the LCD monitor.
e
"
(d )"
3
43