FujiFilm FinePix F810 Owner's Manual page 28

S SENSITIVITY
p PHOTO MODE PHOTOGRAPHY
1
1 0 0 2
3 0
2
0 1 0 2
ＩＳＯ ＩＳＯ
２００ ２００
１００ １００
８０ ８０
ＡＵＴＯ ＡＵＴＯ
/ / / / / / /
ＩＳＯ ＩＳＯ
２００ ２００
１００ １００
８０ ８０
ＡＵＴＯ ＡＵＴＯ
3
１０ １０
Ｐ
２５０ ２５０ Ｆ５．６ Ｆ５．６
■ Default sensitivity setting
Photography mode B m
Sensitivity AUTO 100 100
54
q
1 Set the Power switch to " ".
B m
2 Set the Mode dial to " ", "
" / ", " N ", " M ", " < " or " > " mode.
p
3 Press the " " button.
●
!
In " r " Movie mode, do not set the " S " (sensitivity) setting.
Sensitivity is retained even when the camera is off
or the Mode dial setting is changed.
S
1 Press "d" or "c" to select the "
then press "a" or "b" to change the setting.
2 Press the "MENU/OK" button to confirm the
setting.
h Settings
B
: AUTO (80 to 640) 80/100/200/400/800
m , . / N M < >
, , , , , , and : 80/100/200/400/800
●
!
When setting CCD-RAW (➡P.91), only the "80", "100", "200"
and "400" sensitivity settings can be selected.
●
!
While selecting a higher sensitivity setting will allow you to
take pictures in darker locations, it will also increase the
amount of speckling in your images. Streaking may also be
visible in shots of scenes such as the night sky.
Choose the sensitivity setting that best suits the conditions.
Selecting AUTO as the sensitivity setting, the
camera selects the best sensitivity setting for the
subject brightness.
The AUTO sensitivity setting can be selected in the
B
" " Photography modes.
When the sensitivity is set to "80", "100", "200",
"400" or "800" the selected sensitivity setting
appears on the LCD monitor.
, . / N M <
200 200 80
High-sensitivity photography ( ISO 800 )
, .
", " ", " ",
When a high-sensitivity (ISO 800) is selected, the quality setting "
automatically reset to "
h Digital zoom focal lengths (STD:Standard mode)
2
: approx. 130 mm-325 mm, max. zoom scale: approx. 2.5×
`
: approx. 130 mm-819 mm, max. zoom scale: approx. 6.3×
h Digital zoom focal lengths (WIDE:Widescreen mode)
E
: approx. 142 mm-738 mm, max. zoom scale: approx. 5.2×
✽ 35 mm camera equivalents
●
!
The digital zoom cannot be used with the "
●
!
The high-sensitivity photography cannot be selected when setting CCD-RAW (➡P.91).
●
!
When you specify a high-sensitivity, the amount of noise (interference) in the image shown on the LCD monitor before the
" setting and
picture is taken increase. However, this is normal.
High-sensitivity photography is retained even when the camera is off or the Mode dial setting is
changed.
◆
Quality setting in high-sensitivity mode
When a high-sensitivity setting (ISO 800) is selected, the "
no longer available. The "
>
3 £
, " (the " " appears).
a
✽
✽
3 ", " ™ " or " £ " setting.
◆
5 T µ
", " ", "
` 2 3 E ™ £
", " ", " ", " ", " " and " " quality modes can be selected.
5 T µ ≤
", " ", " " or " " is
≤
" and " " quality modes are
3
55