FujiFilm FinePix F810 Owner's Manual page 27

PHOTOGRAPHY FUNCTIONS
CONTINUOUS AF
While the "C-AF" button is pressed, the camera continues to focus on the main subject in the AF
frame. Use this button to take pictures of a moving subject.
1
2
3
１０ １０
AUTO AUTO
4
１０ １０
AUTO AUTO
5
52
Available Photography mode:
q
Set the Power switch to " ".
B m , .
Set the Mode dial to " ", " ", " ", " ", "
N M < >
" ", " ", " " or " " mode.
Frame the shot so that the subject fills the center of
the image or the entire AF frame.
Because you cannot check the focusing using the
viewfinder, continuous AF is only available when
the LCD monitor is used.
Press the "C-AF" button.
While the "C-AF" button is held down, the camera
continuously focuses on the main subject inside the
AF frame.
●
!
Using the "WIDE/STD" switch while the "C-AF" button is
pressed cancels Continuous AF mode.
Press the shutter button down halfway (AF/AE lock)
without releasing the button, press the button down
fully to take the picture.
This allows you to shorten the focusing time.
●
!
Continuous AF is disabled in the AF AREA or MF (Manual
Focus) modes.
See P.61 for information on changing focus mode.
p PHOTO MODE PHOTOGRAPHY
y QUALITY MODE ( NUMBER OF RECORDED PIXELS )
1
1 0
0 3
/
",
2
0 1
ＱＵＡＬＩＴＹ ＱＵＡＬＩＴＹ
Quality settings in Photography mode
Quality mode
F (4048 × 3040)
T
F (3968 × 2232)
≤
N (4048 × 3040)
T
N (3968 × 2232)
≤
(2848 × 2136)
5
(3200 × 1800)
µ
(2048 × 1536)
3
(2304 × 1296)
£
(1600 × 1200)
2
(2048 × 1152)
™
(640 × 480)
`
(768 × 432)
E
✽ For full-screen playback on a wide-screen or high-definition TV or to print at HV (Hi Vision) size, select a quality
setting for Widescreen mode shooting.
●
!
See P.20 for information on changing the setting to WIDE/STD.
●
!
See P.79 for information on printing images shot as Widescreen mode images.
◆
Quality setting in high-sensitivity mode
When a high-sensitivity setting (ISO 800) is selected, the "
no longer available. The "
1 Set the Power switch to "
2 0
2 Set the Mode dial to "
" / ", " N ", " M ", " < " or "
p
3 Press the " " button.
The quality setting is retained even when the
camera is off or the Mode dial setting is changed.
1 Press "d" or "c" to select the "
2 0
and then press "a" or "b" to change the setting.
2 Press the "MENU/OK" button to confirm the
setting.
１０ １０ ＦＲＡＭＥＳ ＦＲＡＭＥＳ
１９ １９
２５ ２５
１２２ １２２
●
!
The numbers to the right of each setting show the number of
available frames.
●
!
When changing the quality setting, the number of available
frames also changes (➡P.25).
Sample Uses
Printing at up to 14 × 17 in. (35.6 × 43.2 cm) / A3 size
T ≤
For better quality, select " F" or " F"
Printing at up to 14 × 17 in. (35.6 × 43.2 cm) / A3 size
Printing at up to 10R (25.4 × 30.5 cm) / A4 size
Printing at up to 6R (15.2 × 20.3 cm) / A5 size
Printing at up to 4R (10.2 × 15.2 cm) / A6 size
To use for e-mail or web site
◆
5 ", " T ", " µ
` 2 3 E ™ £
", " ", " ", " ", " " and " " quality modes can be selected.
q
".
B m , .
", " ", " ", " ",
> " mode.
y " quality setting
3
" and " ≤ " quality modes are
53