Login Into Instant User Interface; Specifying The Country Code - Dell PowerConnect W-IAP3WN User Manual

Login into Instant User Interface

Launch a web browser and navigate to instant.dell-pcw.com (or any URL or web address). In the login screen,
enter the following credentials:
Username— admin

Password— admin

Figure 3
When you use a provisioning Wi-Fi network to connect to the internet, all browser requests are directed to the
Instant user interface. For example, if you enter www.example.com in the address field, you will be directed to the
Instant user interface. You can change the default login credentials after your first login.

Specifying the Country Code

NOTE: Skip this section, if you are installing the IAP in United States or Japan.
Dell PowerConnect W-Series Instant Access Points are shipped in three variants:
IAP-US (United States)

IAP-JP (Japan)

IAP-ROW (Rest of World)

After you successfully login to the Instant user interface, the Country Code window appears if IAP-ROW APs are
installed. Select the country code for the IAP-ROW APs installed.
For the complete list of the countries that are supported in the IAP-ROW variant type, see
on page 237.
Figure 4
16 | Initial Configuration
Instant User Interface Login Screen
Specifying the Country Code
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide
"Regulatory Domain"