IAP92, W-IAP93, W-IAP134, and W-IAP135 devices support up to 16 SSIDs. After you enable this option, the
number of SSIDs that become active on each IAP depends on the IAP platform.
NOTE: Enabling the Extended SSID option disables mesh.
Enabling the Extended SSID option
To enable the extended SSID option:
1. Click the Settings link at the upper right corner of the Instant WebUI.
2. Click the Show advanced options link.
3. In the General tab, select Enabled from the Extended SSID drop-down list.
4. Click OK.
5. Reboot the AP for the changes to take effect.
After you enable the option and reboot, the Wi-Fi link and mesh are disabled automatically.
Figure 49
Enabling Extended SSID
66 | Wireless Network
Dell PowerConnect W-Series Instant Access Point 6.1.3.4-3.1.0.0 | User Guide